#CLOVER EFI INSTALLER INSTALL#
Boot up via USB and choose Boot Install macOS from YOUR_DRIVE_NAME.Ģ0. Type the name of your target drive, hit ENTER, then reboot.ġ9. Type this command and hit ENTER: /Volumes/Image\ Volume/PreInstall/preġ8. Once the system reboots, boot back into the USB installer and open Terminal.ġ7. Also, overwrite prelinkedkernel with the file in the Dropbox link. Overwrite the file with the one in the Dropbox link.ġ5. Open it, and navigate to /macOS Install Data/Locked Files/ Boot Filesġ4. You'll now see your new target drive in Finder.ġ3. Once done, reboot your system and boot back into your previous hackintosh (as this installation requires the help of another drive with a working Hackintosh system)ġ2. Once it reaches the Installation screen, format the drive of your choice, if needed, and install as normal.ġ1. You may have to use these command to help you get to the installation screen: -v npci=0x3000 keepsyms=1 debug=0x100 (the last two and -v are important, add anything else if needed)ġ0.
Now will be a good time to copy the Clover EFI installer plus any other files that you may find necessary onto your USB in a separate folder.ĩ. Once that's done, install the latest version of Clover on your USB and you can use the same kexts/drivers you used for your High Sierra installation.ħ. Unzip, copy, and paste THESE folders to the root of the USB (just PreInstall and PostInstall)Ħ. This video, although originally made for High Sierra, demonstrates these steps in its entirety as it still applies for Mojave: ĥ.
Now, it will erase your USB drive and make it a bootable installer.ģ. Sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia -volume /Volumes/YOUR_USB_NAME This requires the createinstallmedia method, which is: Grab the macOS Mojave 10.14.1 installer from this link. Every experience is different due to what kext(s) works with your specific system configuration NOTE: This guide works for AMD Ryzen, FX, etc.
0 kommentar(er)
